Laminating Equipment
For big laminating jobs, you need big laminating equipment! Take
a look at the workshop-ready laminating equipment models we offer.
All machines work with every veneer product we offer.
Our mission: Provide for our earthly needs by providing to others,
quality, environmentally friendly products and activities, always
recognizing God through Jesus.
Lenderink Technologies
1267 House St. NE
Belmont, Michigan 49306
• Phone (616) 887-8257
• Fax (616) 887-7910
sales@dryfilmadhesives.com
| LAMINATING
EQUIPMENT for use with Dry Film Adhesives |
Dry Glue Laminating equipment
for use with DRY ADHESIVE FILM and CLEAR COAT™ OVERLAY DRY FILM
MACHINE FEATURES &
SPECIFICATIONS:
| I. |
|
FUNCTION:
To melt and impress Adhesive Film and Clear Coat™ Overlay
Dry Film into/onto surfaces of wood, metal, ceramic, fabric, glass
and plastic. |
| II. |
|
OPERATION:
Veneer is fed between two (2) electric hot plates, melting
the copolyester film, which penetrates and / or overlays. |
| III. |
|
COMPONENTS:
- Non-stick belts, driven by
adjustable rollers, pass between heated plates.
- Floating plates permit thickness
change of .004" to 1". (Pressure Adjustable)
- Foot valve activates rolls.
- Steel base gives 35 inch
feed level from floor.
- 25/50" belts respond to tracking
adjusters.
- Metal cover and belt guard
for safety.
- Variable speed motor drives
chain sprockets.
- Readily adjustable heat,
pressure and speed controls for varying requirements.
|
| IV. |
|
FEATURES:
- Available for one (1) side
or two (2) side lamination.
- Precision adjustable for
varying requirements.
- Belt changing is greatly
simplified with unique release designs.
- Slightly domed front take
up roller allows smooth tracking of belts.
- Long life Teflon coating
eliminate sticking.
- Destaco type clamps provide
quick release for service, and quick return to previous settings.
- Steel frame has footings
for permanent floor attachment.
|
| V. |
|
| SPECIFICATIONS*:
|
25" |
50" |
|
| A.
Weight |
600# |
900# |
|
| B.
AMP |
30 |
60 |
25"
width @ $37,000 FOB MI |
| C.
Size |
45"
H 38" Long 33" Wide |
45"
H 38" Long 60" Wide |
50"
width @ $56,000 FOB MI |
|
Orders will be shipped 12 to 16 weeks after
receipt of 50% DWP.
*Subject to Change without
notice
Visit
the our affiliate websites for user manuals and system operation information.
Link opens second browser window: HMTmfg.com
·
Meyer
·
Rosenthal
| "L"
Series Dry Film Adhesive Laminating System |
| The "L" Series
Sheet Laminating System is
used for wood veneer, plastic, foam, board, fabric, vinyl, doors,
etc. Applies roll or sheet dry film adhesives and overlays. Also
pre-applied adhesive films for later use in hot press, heated
nip roll or vacuum.
No
wash
No waste
Low labor (2) |
No
Bleed through
No squeeze out
Excellent lay flat |
This
unique very, very safe - continuous flow through inline
system allows lamination to be accomplished without any
solvents, toxins or water.
Surface
laminates are kept cool for improved quality.
Three
(3) models are available, allowing bonding of materials
from twelve (12) to sixty (60) inches wide.
Feed
Speed is 20 to 40 lineal feet per minute with roll web to
web much faster. Any
width or length sheet... |
"L" Series Dribond Sheet Laminating
System |
Excellent for short runs...
Approximately
10 minute start up and shut down...
Heated
NIP rolls now available!
|
|
Specifications |
| Model: |
L26M |
L50M |
L62M |
| Size: |
48"Wx60"
Hx21'6"L |
77"Wx60"
Hx21'6"L |
79"Wx60
Hx21'6"L |
| Weight: |
1265
lbs. |
2515 lbs. |
2740
lbs. |
| Voltage: |
208
/ 240 / 480 |
208 / 240
/ 480 |
208
/ 240 / 480 |
| F. L. Amps: |
40
/ 35 /20 |
85 / 75 /
40 |
100
/ 85 / 45 |
| Air Consumption*: |
80-100
PSI 1 CFM |
80-100 PSI
1 CFM |
80-100
PSI 1 CFM |
| Price: |
$15M-19M |
$23M-29M |
$27M-34M
|
|
If
we do not carry the laminating machine you need, we will be happy
to advise you on the perfect laminating equipment for your needs.
Visit the our affiliate
websites for user manuals and system operation information. Link opens
second browser window: HMTmfg.com
·
Meyer
·
Rosenthal
| Dry
Film Adhesive and Overlay Roll Laminating System |
Coat front or back...
SAVE time and money...
Low
Price: Expensive coating machines are not needed!
The Dry Film Adhesive Laminating System will coat up to
40+ feet (lineal) per minute and up to 62" wide!
Short
runs: Run as needed - Cut inventories - Stop storing
and continually inventorying large quantities of materials.
Save
Time: Apply Dry Film Adhesive or Overlay as needed.
Quickly supply your own needs... Just-In-Time!
Easy
to Use: 2 hour training! 1 or 2 workers per machine.
EPA
/ OSHA will love you: No mixing... no spray guns...
no spray booths... no glue pots to clean up.
Efficient
and Compact: Minimal energy - minimal setup - coat
or laminate up to 40+ feet (lineal) per minute up to 62"
wide.
Equipment starts
at approximately $5000 (24" Bench Top).
Step
1 - Load
Dry Film Adhesive and Overlay into payout rack and thread
material though to rewind shaft.
Load glue onto
payout bar.
Step
2 - Start machine, setting "Speed" and "Heat".
Step
3 - Close
compression rolls and roll glue onto top heated roll, starting
coating process.
To STOP coating
process, push "Retract" button, opening compression rolls.
Laminating and Pressing Specifications
If
we do not carry the laminating machine you need, we will be
happy to advise you on the perfect laminating equipment for
your needs.
|
